Set Jumpers The default jumper settings have been set for the common usage standard of this mainboard. You don’t need to enable this item unless you have a legacy diskette drive with k capacity. It integrates the most advanced functions you can find to date in a compact ATX board. C] Install Audio Driver [4. The combination shown as follows. Hardware Mointor Use this menu to sets some of the parameters for the hardware monitoring function of this mainboard.
|Date Added:||21 February 2018|
|File Size:||16.62 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Pressing the reset switch causes the system to restart. Note that the cable should be oriented with its colored stripe usually red or magenta connected to pin 1 both on the mainboard IDE or FDD connector and on the device as well.
Top user review
The following list will help you to identify jumpers, slots, and connectors along with their assigned functions: When enabled, separate memory banks are set of odd and even addresses, and upcoming byte of memory is accessible while refreshing the current byte.
The system will automatically detect the kind of CPU that you have installed and make the appropriate adjustments to the items.
It’s worth a thousand words. Reproducing any of the material contained herein is prohibited without the consent of the publisher. The information contained in this manual is av449p for general use by the customers. We recommend that you leave this item at the default value.
If the AutoRun screen does not appear, double click or run D: F Quit – Close this CD. Set Jumpers The default jumper settings have been set for the common usage standard of this mainboard. More Print this page Share this page.
Please follow the steps as follows to finish CPU installation. Attach a connector cable to the 2-pin PW BN header avv49p the mainboard.
Shuttle * Products * Mainboards * Socket * VIA-chipset * AV49PN * Download
Pin 1 to the right: Jumpers with two pins are shown as for Close [On] or for Open [Off]. The system BIOS is managing and executing a variety of hardware related functions in the system, including: If your computer case is already equipped with mounting studs, you need to tighten the screws to attach the mainboard.
Floppy Drive Seek If this item is enabled, it checks the size of the floppy disk drives at start-up time.
When putting the mainboard down, place it on top of its original packaging film, on an even surface, and components side up. Set the required jumpers on each device according to the instructions provided by the manufacturer.
Try Other Boot Device If you enable this item, the system searches all other possible loca tions for and operating system if it fails to find one in the devices specified under the First, Second, and Third boot devices.
If you enable this item, the system can automatically resume if there is an incoming call on the Modem. To make your first computer DIY experience successful, right from the start, we have designed the 3. Return the jumper cap to pins Monitor is working, AGP Graphic card is The email address entered is already associated to an account.
Building your own computer system is not as difficult as you zata think. Note that both cable wiring and type of plug may vary, which depend on the fan maker. This will greatly facilitate in making the connections to the mainboard described below. Make sure your power supply have enough power safa higher speed processor installed.
Two mini jumpers must be setted on pins and pinswhen this header is not used. B9 foxconn Line-Out Port Connector Line-Out is a stereo output port through which the combined signal of all internal and external audio sources on the board is output.
That is just a start of a list of sites that I have used to find manuals.