The data light will be on if there is data in the buffer which has not been printed. The Print Manager or the printer driver usually causes the conflict in Windows. For more information on setting dip switches, please see Chapter 3 page 6 of your User’s Guide. If the problem still persists, have the printer taken in to be serviced. SmartPark is an advanced paper handling feature. If you are still getting garbage, disable the Windows Print Manager.

Uploader: Kikora
Date Added: 8 March 2005
File Size: 48.6 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 5692
Price: Free* [*Free Regsitration Required]

When printing labels, it is recommended that you only print with a pull tractor. An Install Driver dialog box will appear on your screen. Check the front panel to see if the Bin 1 or Bin 2 light is on.

UKT Support – Epson LQ Printer

Insert the disk into the appropriate disk drive. The specification recommended is 25 percent. Turn the printer OFF to save the setting. Once you have the TOF position set lq-170 you want it, send a print job. If you are using a straight through modem cable, change the cable to a null modem cable pins 2 and 3 are reversed.

esx Go back into Windows and verify the printer driver that has been selected is correct. Click on Close and you are done installing the printer driver. If you have already reconnected the cable on the computer and the printer, changed to another cable, and are positive you are using a fully-shielded parallel cable, chances are that you are having a conflict in Windows.


Epson LQ ESC/­P2 Printer driver download free (ver. 1.­0AE)

If it is, turn the printer OFF and manually eject the continuous feed paper. In the Printers dialog box, lq1170 on the Add button. If you are already using a null modem cable, ensure that the Default Settings for the serial port on the printer match the settings on your computer.

Many applications have an option to change the number of lines per page.

Epson LQ-1170 ESC P 2 Drivers Download

The printer should initialize properly and the Bin light should not be on. The flag reset timing feature settings are selectable through dip switches on the serial interface card. The printer should initialize properly. The above procedures apply any time you specify a User Defined page size p as checks, small envelopes, or sheet fed labels, to name a few.

When a printer prints garbage, it usually indicates a faulty cable or a loose connection. Epson’s definition of a 25 percent duty cycle stands for the printer printing not idle for two hours per day based on an eight hour day at 22 days per month. Reload the paper onto the tractor unit and try to print.

The printer remembers adjustments made to continuous paper, even after the printer is turned off. There is always the possibility of a loose connection or a bad cable. When epwon, the paper feeds back to the top-of-form loading position. To verify the driver in Windows 3.


If you are still lq-1710 problems after changing your cable, you may have a computer or printer port issue. The SmartPark feature is not available when using the printer in pull tractor position.

These switches control certain printer functions and default settings, the details of which are listed below. When using single sheets, the printer automatically provides a small top and bottom margin.

Epson LQ-1170 ESC/­P2 Printer driver download free (ver. 1.­0AE)

Once the cable has been reconnected, power the printer and computer back ON. The Print Manager or the printer driver usually causes the conflict in Windows. Typically, dot matrix printers have fixed sized fonts which are about 10 points.

Next, take a hold of the print head and move it all the way to the left, then back to the right. Power OFF your printer and computer.